HP Pavilion DV6-1030 Maintenance And Service Manual

HP Pavilion DV6-1030 Maintenance And Service Manual

Entertainment pc
Hide thumbs Also See for Pavilion DV6-1030:
Table of Contents

Advertisement

HP Pavilion dv6 Entertainment PC
Maintenance and Service Guide

Advertisement

Table of Contents
loading

Summary of Contents for HP Pavilion DV6-1030

  • Page 1 HP Pavilion dv6 Entertainment PC Maintenance and Service Guide...
  • Page 2 SD Logo is a trademark of its proprietor. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.
  • Page 3 Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow.
  • Page 4 Safety warning notice...
  • Page 5: Table Of Contents

    Table of contents 1 Product description 2 External component identification Top components ... 8 TouchPad ... 8 Lights ... 9 Buttons, speakers and fingerprint reader ... 11 Keys ... 13 Front components ... 14 Rear component ... 15 Right-side components ... 15 Left-side components ...
  • Page 6 Grounding guidelines ... 54 Component replacement procedures ... 57 Service tag ... 57 Computer feet ... 58 Battery ... 59 Webcam/microphone module ... 60 Optical drive ... 62 Memory module ... 64 TV tuner module ... 66 RTC battery ... 67 Hard drive ...
  • Page 7 System Configuration menu ... 112 Diagnostics menu ... 113 6 Specifications Computer specifications ... 114 15.6-inch, WXGA BrightView display specifications ... 115 16.0-inch WXGA BrightView display specifications ... 116 15.6-inch WXGA AntiGlare display specifications ... 117 16.0-inch WXGA AntiGlare display specifications ... 118 Hard drive specifications ...
  • Page 8 9 Connector pin assignments 1394 ... 150 Audio-in (microphone) ... 150 Audio-out (headphone) ... 151 External monitor ... 151 HDMI ... 152 RJ-11 (modem) ... 153 RJ-45 (network) ... 153 Universal Serial Bus ... 154 10 Power cord set requirements Requirements for all countries or regions ...
  • Page 9: Product Description

    Category Product Name Processors Description HP Pavilion dv6 Entertainment PC Intel® Core™2 Duo T9900 3.06-GHz with 6-MB L2 cache and 1066-MHz front side bus (FSB) Intel® Core™2 Duo T9800 2.93-GHz with 6-MB L2 cache and 1066-MHz front side bus (FSB) Intel Core2 Duo T9600 2.80-GHz with 6-MB L2...
  • Page 10 Category Chipset Graphics Chapter 1 Product description Description Intel Core Duo P8400 2.26-GHz with 3-MB L2 cache and 1066-MHz FSB Intel Core Duo P7550 2.26-GHz with 3-MB L2 cache and 1066-MHz FSB Intel Core Duo P7450 2.13-GHz with 3-MB L2 cache and 1066-MHz FSB Intel Celeron®...
  • Page 11 Category Description Unified memory architecture (UMA) with shared video memory: ● Up to 270 MB of graphics subsystem memory on computer models equipped with 1024 MB of main system memory ● Up to 782 MB of graphics subsystem memory on computer models equipped with 2048 MB of main system memory ●...
  • Page 12 8192-MB total system memory (4096 MB × 2, dual-channel) Supports all Serial ATA (SATA) 9.5 mm, 6.35-cm (2.5-inch) hard drives Supports one hard drive Support for HP ProtectSmart Hard Drive Protection Single hard drive configurations: ● 160 GB (5400 rpm) ●...
  • Page 13 Category Description Webcam VGA camera Fixed (no tilt) Activity LED 640 × 480 by 24 frames per second Microphone 2 omnidirectional microphones, dual-array with appropriate software (supports beam forming, echo cancellation, and noise suppression) Audio HD Audio (IDT) Supports Microsoft® Premium Requirements Pavilion-branded Altec Lansing speakers Modem 56K V.92 data/fax modem (select models only)
  • Page 14 Two stereo headphone jacks (audio-out) Microphone input (audio-in) 2-pin AC power for 90-W AC adapter Expansion port 3 supports the HP xb3000 Notebook Expansion Base and HP Notebook QuickDock 16-inch full-size keyboard with numeric keypad Standard IMR keyboard with molded keyboard...
  • Page 15 Category Description 6-cell, 55-Wh, 2.55-Ah Li-ion battery (Germany only) 6-cell, 55-Wh, 2.55-Ah Li-ion battery 12-cell, 95-Wh, 8.8-Ah Li-ion battery 90-W AC adapter with localized cable plug support (2-wire plug with ground pin, supports 2- pin DC connector) 65-W AC adapter with localized cable plug support (2-wire plug with ground pin, supports 2- pin DC connector) Security...
  • Page 16: External Component Identification

    External component identification Top components TouchPad Item Component TouchPad light TouchPad* Left TouchPad button* TouchPad on/off button TouchPad vertical scroll zone Right TouchPad button* *This table describes factory settings. To view and change TouchPad preferences, select Start > Control Panel > Hardware and Sound >...
  • Page 17: Lights

    ● Blinking: The hard drive or optical drive is being accessed. ● Amber: HP ProtectSmart Hard Drive Protection has temporarily parked the hard drive. On: Caps lock is on. ● White: Computer sound is turned on.
  • Page 18 Item Component (11) Stop light (12) Wireless light (13) Num lock light *The 2 power lights display the same information. The light on the power button is visible only when the computer is open. The power light on the front of the computer is visible whether the computer is open or closed. Chapter 2 External component identification Description On: The stop button has been pressed.
  • Page 19: Buttons, Speakers And Fingerprint Reader

    Buttons, speakers and fingerprint reader Item Component Speakers (2) Power button* Volume mute button Volume scroll zone Previous/rewind button Play/pause button Description Produce sound. ● When the computer is off, press the button to turn on the computer. ● When the computer is on, press the button briefly to initiate Sleep.
  • Page 20 Item Component Next/fast forward button Stop button Wireless button (10) Fingerprint reader (select models only) *This table describes factory settings. For information about changing factory settings, refer to the user guides located in Help and Support. Chapter 2 External component identification Description ●...
  • Page 21: Keys

    Keys Item Component Windows logo key Windows applications key Integrated numeric keypad keys Function keys Description Displays system information about your computer when pressed in combination with the key. Executes frequently used system functions when pressed in combination with a function key or the Displays the Windows Start menu.
  • Page 22: Front Components

    ● Blinking: The hard drive or optical drive is being accessed. ● Amber: HP ProtectSmart Hard Drive Protection has temporarily parked the hard drive. Receives a signal from the remote control. Connects an optional computer headset microphone, stereo array microphone, or monaural microphone.
  • Page 23: Rear Component

    Rear component Component Vent Right-side components Item Component Optical drive Optical drive light USB ports (2) TV antenna/cable jack (select models only) RJ-11 (modem) jack (select models only) Security cable slot Activity light for the power connector Power connector Description Enables airflow to cool internal components.
  • Page 24: Left-Side Components

    Left-side components Item Component External monitor port Expansion port 3 RJ-45 (network) jack HDMI port eSATA/USB port (select models only) USB port 1394 port (select models only) Activity light for the Digital Media Slot Digital Media Slot (10) ExpressCard slot Chapter 2 External component identification Description Connects an external VGA monitor or projector.
  • Page 25: Bottom Components

    Bottom components Item Component Hard drive bay Vents (8) Battery bay Memory module compartment Battery release latch Description Holds the hard drive. Enable airflow to cool internal components. NOTE: The computer fan starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation.
  • Page 26: Display Components

    Display components Item Component Internal display switch Internal microphones (2) Integrated webcam light Integrated webcam Chapter 2 External component identification Description Turns off the display and initiates Sleep if the display is closed while the power is on. Record sound. On: The integrated webcam is in use.
  • Page 27: Wireless Antennas (Select Models Only)

    Wireless antennas (select models only) On select computer models, at least 2 antennas send and receive signals from one or more wireless devices. NOTE: The antennas are not visible from the outside of the computer. For optimal transmission, keep the areas immediately around the antennas free from obstructions. To see wireless regulatory notices, refer to the section of the Regulatory, Safety and Environmental Notices that applies to your country or region.
  • Page 28: Illustrated Parts Catalog

    Illustrated parts catalog Service tag When ordering parts or requesting information, provide the computer serial number and model description provided on the service tag. (1) Product name: This is the product name affixed to the front of the computer. (2) Serial number (s/n): This is an alphanumeric identifier that is unique to each product. (3) Part number/Product number (p/n): This number provides specific information about the product's hardware components.
  • Page 29: Computer Major Components

    Computer major components Item Description Display assembly (includes wireless antenna transceivers and cables) 15.6-inch WXGA BrightView display assembly with low light VGA webcam and 2 microphones, Onyx Spare part number 511867-001 Computer major components...
  • Page 30 Item Description 15.6-inch WXGA BrightView display assembly with low light VGA webcam and 2 microphones, Moonlight White (replaced by 571743–001) 15.6-inch WXGA BrightView display assembly with standard VGA webcam and 2 microphones, Moonlight White (replaces 517862–001) 15.6-inch WXGA BrightView display assembly with low light VGA webcam and 2 microphones, Espresso Black (replaced by 571745-001) 15.6-inch WXGA BrightView display assembly with standard VGA webcam and 2 microphones, Espresso Black (replaces 518776–001)
  • Page 31 Item Description Espresso Black (replaces 518790–001 on select models) Power button board for computers with discrete graphics subsystem memory (includes cable) Power button board for computers with UMA graphics subsystem memory (includes cable) Keyboard, Onyx, IMR, molded keyboard characters (includes keyboard cable) For use in Belgium For use in the Czech Republic For use in France...
  • Page 32 Item Description For use in France For use in French Canada For use in Germany For use in Greece For use in Hungary For international use For use in Israel For use in Italy For use in Japan For use in Latin America For use in Portugal For use in Russia For use in Saudi Arabia...
  • Page 33 Item Description For use in Spain For use in Switzerland For use in Taiwan For use in Turkey For use in the United Kingdom For use in the United States Keyboard, Espresso Black, IMR, molded keyboard characters (includes keyboard cable) For use in Belgium For use in the Czech Republic For use in France...
  • Page 34 Item Description For use in Hungary For international use For use in Israel For use in Italy For use in Japan For use in Latin America For use in Portugal For use in Russia For use in Saudi Arabia For use in South Korea For use in Spain For use in Switzerland For use in Taiwan...
  • Page 35 Item Description For use in South Korea For use in Spain For use in Switzerland For use in Taiwan For use in Thailand For use in Turkey TFor use in the United Kingdom Top cover (includes TouchPad and TouchPad buttons, and speaker assembly): For use only with computer models equipped with a fingerprint reader, Onyx For use only with computer models not equipped with a fingerprint reader, Onyx For use only with computer models equipped with a fingerprint reader, Moonlight White 518108-001...
  • Page 36 Item Description Intel Core2 Duo T9900 3.06-GHz with 6-MB L2 cache and 1066-MHz FSB Intel Core2 Duo T9800 2.93-GHz with 6-MB L2 cache and 1066-MHz FSB Intel Core2 Duo T9600 2.80-GHz with 6-MB L2 cache and 1066-MHz FSB Intel Core2 Duo T9550 2.66-GHz with 6-MB L2 cache and 1066-MHz FSB Intel Core2 Duo T9400 2.53-GHz with 6-MB L2 cache and 1066-MHz FSB Intel Core2 Duo T6600 2.20-GHz with 2-MB L2 cache and 800-MHz FSB Intel Core2 Duo T6500 2.10-GHz with 2-MB L2 cache and 800-MHz FSB...
  • Page 37 Item Description Broadcom 4322 802.11a/b/g/n WLAN module for use only with computer models in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cameroon, Cape Verde, the Central African Republic, Chad, Chile, the People's Republic of China, Colombia, Comoros, the Congo, Costa Rica,...
  • Page 38 Item Description Broadcom BCM4312 802.11b/g WLAN module for use only with computer models in Antigua and Barbuda, Barbados, Belize, Canada, the Cayman Islands, Guam, Puerto Rico, Trinidad and Tobago, the U.S. Virgin Islands, and the United States Broadcom BCM4312 802.11b/g WLAN module for use only with computer models in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia,...
  • Page 39 Item Description Broadcom BCM4312 802.11b/g WLAN module for use only with computer models in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cameroon, Cape Verde, the Central African Republic, Chad, Chile, the People's Republic of China, Colombia, Comoros, the Congo, Costa Rica,...
  • Page 40 Item Description 12-cell, 95-Wh, 8.8-Ah Li-ion battery for use with all computer models 6-cell, 55-Wh, 2.55-Ah Li-ion battery for use with all computer models 6-cell, 55-Wh, 2.55-Ah Li-ion battery for use only with computers for Germany 6-cell, 47-Wh, 2.55-Ah Li-ion battery for use with all computer models (18) Base enclosure (includes rubber feet) Rubber Feet Kit (not illustrated, includes 4 base enclosure rubber feet)
  • Page 41: Display Assembly Components

    Display assembly components The HP Pavilion dv6 Entertainment PC offers two types of display assemblies. Component spare parts are listed in this section for AntiGlare display assemblies and BrightView display assemblies. AntiGlare display assembly spare parts Item Description Display enclosure, Onyx (for 16-inch only) (includes wireless antenna transceivers...
  • Page 42 Item Description Display Screw Kit (not illustrated) Display LCD cable (not illustrated) Chapter 3 Illustrated parts catalog Spare part number 512362-001 512825-001...
  • Page 43: Brightview Display Assembly Spare Parts

    BrightView display assembly spare parts Item Description Display bezel (includes logo and display lid switch actuator magnet) For use with computer models equipped with 16-inch displays For use with computer models equipped with 15.6-inch displays Webcam/microphone module, low light VGA (includes cable) (replaced by 571742-001) Webcam/microphone module, standard VGA (includes cable) (replaces 512827–...
  • Page 44 Item Description Display enclosure, Onyx (includes wireless antenna transceivers and cables and logo LED board and cable) 16-inch DIsplay enclosure, Moonlight White (includes wireless antenna transceivers and cables and logo LED board and cable) 15.6-inch DIsplay enclosure, Espresso Black (includes wireless antenna transceivers and cables and logo LED board and cable) 16-inch Display Rubber Kit (not illustrated, includes display bezel rubber screw covers) 15.6- inch...
  • Page 45: Plastics Kit

    Plastics Kit Item Description Plastics Kit ExpressCard slot bezel Hard drive bay cover (includes 2 captive screws, secured by C-clips) Memory module compartment cover (includes 1 captive screw, secured by a C-clip) Spare part number 511890-001 Plastics Kit...
  • Page 46: Cable Kit

    Cable Kit Item Description Cable Kit Fingerprint reader cable Audio/Infrared module cable Modem module cable (includes RJ-11 jack) USB cable Power connector cable TV tuner module cable (not illustrated) Chapter 3 Illustrated parts catalog Spare part number 512832-001...
  • Page 47: Miscellaneous Parts

    Miscellaneous parts Description AC adapters 65-W AC adapter 90-W AC adapter, PFC 90-W AC adapter for use only in Germany Power cords, Black: Argentina Australia and New Zealand Belgium, Europe, Finland, France, Germany, Greece, the Netherlands, Norway, Portugal, Spain, and Sweden Brazil Canada, French Canada, Latin America, Thailand, and the United States Denmark...
  • Page 48: Sequential Part Number Listing

    Description Headphone, black, with volume control and stereo/mono switch Screw Kit ● Phillips PM2.0×3.0 screw ● Phillips PM2.0×14.0 captive screw ● Phillips PM2.5×3.0 screw ● Phillips PM2.5×4.0 screw ● Phillips PM2.5×5.0 screw ● Phillips PM2.5×5.0 captive screw ● Phillips PM2.5×5.5 captive screw ●...
  • Page 49 Spare part Description number 463955-001 90-W AC adapter, PFC 463958-001 65-W AC adapter 465540-001 Full-function remote control 465541-001 Full-function remote control with teletext 480985-001 Intel Wi-Fi Link 5100 802.11a/b/g/n WLAN module for use with computer models in all countries and regions 482899-001 NTSC/ATSC/ANG hybrid TV tuner module...
  • Page 50 Spare part Description number 490371-021 Power cord for use in Belgium, Europe, Finland, France, Germany, Greece, the Netherlands, Norway, Portugal, Spain, and Sweden 490371-031 Power cord for use in the United Kingdom and Hong Kong 490371-061 Power cord for use in Italy 490371-081 Power cord for use in Denmark 490371-111...
  • Page 51 Spare part Description number 504664-002 Broadcom BCM4312 802.11b/g WLAN module for use only with computer models in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cameroon, Cape Verde, the Central African Republic, Chad, Chile, the People's Republic of China, Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus,...
  • Page 52 Spare part Description number 511872-002 6-cell, 55-Wh, 2.55-Ah Li-ion battery for use only with computers for Germany 511873-001 160 GB, 5400 rpm hard drive (includes left and right bracket rails, connector cable, Mylar cover with tab, and four rubber isolators) 511874-001 250 GB, 7200 rpm hard drive (includes left and right bracket rails, connector cable, Mylar cover with tab, and four rubber isolators) (select models only)
  • Page 53 Spare part Description number 511885-DJ1 Keyboard for use in Greece, Onyx, molded keyboard characters 511887-001 Base enclosure (includes rubber feet) 511888-001 Top cover for use only with computer models not equipped with a fingerprint reader, Onyx (includes TouchPad and TouchPad buttons, and speaker assembly) 511890-001 Plastics Kit (see Plastics Kit on page...
  • Page 54 Spare part Description number 513478-001 Display enclosure for 16-inch AntiGlare displays (includes wireless antenna transceivers and cables), Onyx 513479-001 Display Rubber Kit for 15.6-inch AntiGlare displays (includes display bezel rubber screw covers) 513592-001 Intel Core2 Duo T6400 2.00-GHz with 2-MB L2 cache and 800-MHz FSB 513593-001 Intel Core2 Duo T6600 2.20-GHz processor with 2-MB L2 cache and 800-MHz FSB 513599-001...
  • Page 55 Spare part Description number 517863-161 Keyboard, Moonlight White, IMR, molded keyboard characters (includes keyboard cable), for use in Latin America 517863-211 Keyboard, Moonlight White, IMR, molded keyboard characters (includes keyboard cable), for use in Hungary 517863-221 Keyboard, Moonlight White, IMR, molded keyboard characters (includes keyboard cable), for use in the Czech Republic 517863-251 Keyboard, Moonlight White, IMR, molded keyboard characters (includes keyboard cable), for use in...
  • Page 56 Spare part Description number 518764-B31 Keyboard for international use, Moonlight White, painted keyboard characters 517864-BB1 Keyboard for use in Israel, Moonlight White, painted keyboard characters 517864-DH1 Keyboard for use in Denmark, Norway, and Sweden, Moonlight White, painted keyboard characters 517864-DJ1 Keyboard for use in Greece, Moonlight White, painted keyboard characters 518108-001 Top cover for use with computer models equipped with fingerprint reader, Moonlight White (includes...
  • Page 57 Spare part Description number 518965-051 Keyboard for use in France, Espresso Black, molded keyboard characters 518965-061 Keyboard for use in Italy, Espresso Black, molded keyboard characters 518965-071 Keyboard for use in Spain, Espresso Black, molded keyboard characters 518965-111 Keyboard for use in Switzerland, Espresso Black, molded keyboard characters 518965-131 Keyboard for use in Portugal, Espresso Black, molded keyboard characters 518965-141...
  • Page 58 Spare part Description number 570228-141 Espresso Textured Keyboard, Espresso Black (includes keyboard cable), for use in Turkey 570228-161 Espresso Textured Keyboard, Espresso Black (includes keyboard cable), for use in Latin America 570228-171 Keyboard, Espresso Black (includes keyboard cable), for use in Saudi Arabia 570228-211 Espresso Textured Keyboard, Espresso Black (includes keyboard cable), for use in Hungary 570228-221...
  • Page 59 Spare part Description number 572929-001 Intel Pentium Dual-Core T4300 2.10-GHz with 1-MB L2 cache and 800-MHz FSB 573076-001 Intel Core Duo P7550 2.13-GHz with 3-MB L2 cache and 1066-MHz FSB Sequential part number listing...
  • Page 60: Removal And Replacement Procedures

    Removal and replacement procedures Preliminary replacement requirements Tools required You will need the following tools to complete the removal and replacement procedures: ● Non-magnetic screwdriver ● Phillips P0 and P1 screwdrivers ● Flat-bladed screwdriver Service considerations The following sections include some of the considerations that you must keep in mind during disassembly and assembly procedures.
  • Page 61: Cables And Connectors

    Cables and connectors CAUTION: When servicing the computer, be sure that cables are placed in their proper locations during the reassembly process. Improper cable placement can damage the computer. Cables must be handled with extreme care to avoid damage. Apply only the tension required to unseat or seat the cables during removal and insertion.
  • Page 62: Grounding Guidelines

    Grounding guidelines Electrostatic discharge damage Electronic components are sensitive to electrostatic discharge (ESD). Circuitry design and structure determine the degree of sensitivity. Networks built into many integrated circuits provide some protection, but in many cases, ESD contains enough power to alter device parameters or melt silicon junctions. A discharge of static electricity from a finger or other conductor can destroy static-sensitive devices or microcircuitry.
  • Page 63: Packaging And Transporting Guidelines

    Packaging and transporting guidelines Follow these grounding guidelines when packaging and transporting equipment: ● To avoid hand contact, transport products in static-safe tubes, bags, or boxes. ● Protect ESD-sensitive parts and assemblies with conductive or approved containers or packaging. ● Keep ESD-sensitive parts in their containers until the parts arrive at static-free workstations.
  • Page 64: Equipment Guidelines

    Equipment guidelines Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation. ● When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexible straps with a minimum of one megohm ±10% resistance in the ground cords. To provide proper ground, wear a strap snugly against the skin at all times.
  • Page 65: Component Replacement Procedures

    Component replacement procedures This chapter provides removal and replacement procedures. There are as many as 90 screws, in 10 different sizes, that must be removed, replaced, or loosened when servicing the computer. Make special note of each screw size and location during removal and replacement.
  • Page 66: Computer Feet

    Computer feet The computer feet are adhesive-backed rubber pads. The feet are included in the Rubber Feet Kit, spare part number 516499-001. There are 4 rubber feet that attach to the base enclosure in the locations illustrated below. Chapter 4 Removal and replacement procedures...
  • Page 67: Battery

    Battery Description 12-cell, 95-Wh, 8.8-Ah Li-ion battery for use with all computer models 6-cell, 55-Wh, 2.55-Ah Li-ion battery for use with all computer models 6-cell, 55-Wh, 2.55-Ah Li-ion battery for use only with computer for Germany 6-cell, 47-Wh, 2.55-Ah Li-ion battery for use with all computer models Before disassembling the computer, follow these steps: Shut down the computer.
  • Page 68: Webcam/Microphone Module

    Webcam/microphone module NOTE: This section applies only to computer models equipped with BrightView display assemblies. Display assemblyon page 81 models equipped with AntiGlare display assemblies. NOTE: If it has been determined that the webcam/microphone module is the component that must be replaced to complete the computer repair, the display assembly does not have to be removed.
  • Page 69 Release the display bezel top edge (3) from the display enclosure. Release the webcam/microphone module (1) from the display enclosure as far as the webcam/ microphone module cable allows. Disconnect the webcam/microphone module cable (2) from the webcam/microphone module. Remove the webcam/microphone module. Reverse this procedure to install the webcam/microphone module.
  • Page 70: Optical Drive

    Optical drive NOTE: The optical drive spare part kit includes an optical drive bezel and bracket. Description Blu-ray ROM DVD±R/RW SuperMulti Double-Layer Drive Blu-ray ROM with LightScribe DVD±R/RW SuperMulti Double-Layer Drive DVD±RW SuperMulti Double-Layer Combo Drive Before removing the optical drive, follow these steps: Shut down the computer.
  • Page 71 Remove the two Phillips PM2.0×3.0 screws (1) that secure the optical drive bracket to the optical drive. Remove the optical drive bracket (2). Reverse this procedure to reassemble and install the optical drive. Component replacement procedures...
  • Page 72: Memory Module

    Memory module Description DDR2, 800-MHz, PC2-6400, 1-DIMM: 4 GB 2 GB 1 GB Before removing the memory module, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer.
  • Page 73 NOTE: If necessary, use a non-conductive pointed tool to spread the retaining tabs. Remove the module (2) by pulling it away from the slot at an angle. NOTE: Memory modules are designed with a notch (3) to prevent incorrect insertion into the memory module slot.
  • Page 74: Tv Tuner Module

    TV tuner module NOTE: The TV tuner module spare part kit does not include a TV tuner module cable. The TV tuner module cable is included in the Cable Kit, spare part number 512832-001. NOTE: The TV tuner external antenna cables are available using spare part numbers 482900-001 (with F-PAL jack) and 482900-002 (with PAL jack).
  • Page 75: Rtc Battery

    Lift the edge of the TV tuner module (3), and pull the module away from the slot at an angle. NOTE: The TV tuner module is designed with a notch (4) to prevent incorrect insertion into the TV tuner module slot. Reverse this procedure to install the TV tuner module.
  • Page 76 Use a non-conductive pointed tool to pry the RTC battery from the socket on the system board. Reverse this procedure to install the RTC battery. Be sure that the RTC battery is installed with the “+” sign facing up. Chapter 4 Removal and replacement procedures...
  • Page 77: Hard Drive

    Hard drive NOTE: The hard drive spare part kit includes left and right bracket rails, a connector cable, Mylar cover with tab, and 4 rubber isolators. Description 160 GB, 5400 rpm 250 GB, 7200 rpm (select models only) 250 GB, 5400 rpm 320 GB, 7200 rpm (select models only) 320 GB, 5400 rpm 400 GB, 5400 rpm...
  • Page 78 Lift the right side (2) of the hard drive bay cover, swing it up and to the left, and remove the cover (3). The hard drive bay cover is included in the Plastics Kit, spare part number 511890-001. Use the Mylar tab (1) to lift the hard drive up, and then slide it to the left (2) to release it from the hard drive bay.
  • Page 79 If it is necessary to replace the hard drive bracket or any of the hard drive bracket components, remove the following: (1) Hard drive connector cable (2) Four rubber isolators (3) Four Phillips PM3.0×3.5 screws that secure the hard drive bracket rails and Mylar cover to the hard drive (4) Left and right hard drive bracket rails with mylar cover tabs Reverse this procedure to reassemble and install the hard drive.
  • Page 80: Wlan Module

    WLAN module Description Intel Wi-Fi Link 5100 802.11a/b/g/n WLAN module for use with computer models in all countries and regions (Bluetooth supported) Intel Wi-Fi Link 5100 802.11a/b/g WLAN module for use with computer models in all countries and regions (Bluetooth supported) Broadcom 4322 802.11a/b/g/n WLAN module for use only with computer models in Antigua and Barbuda, Barbados, Belize, Canada, the Cayman Islands, Guam, Puerto Rico, Trinidad and Tobago, the U.S.
  • Page 81 Description Broadcom BCM4312 802.11b/g WLAN module for use only with computer models in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cameroon, Cape Verde, the Central African Republic, Chad, Chile, the People's Republic of China, Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica,...
  • Page 82 Description Broadcom BCM4312 802.11b/g WLAN module for use only with computer models in Antigua and Barbuda, Barbados, Belize, Canada, the Cayman Islands, Guam, Puerto Rico, Trinidad and Tobago, the U.S. Virgin Islands, and the United States (Bluetooth supported) Broadcom BCM4312 802.11b/g WLAN module for use only with computer models in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil,...
  • Page 83 Remove the WLAN module (3) by pulling it away from the slot at an angle. NOTE: WLAN modules are designed with a notch (4) to prevent incorrect insertion into the WLAN module slot. Reverse this procedure to install a WLAN module. Component replacement procedures...
  • Page 84: Switch Cover And Keyboard

    Switch cover and keyboard Description Switch cover (includes LED board and cable), Onyx Switch cover (includes LED board and cable), Moonlight White (replaced by 571747–001 on select models) Switch cover (includes LED board and cable), Moonlight White (replaces 571747–001 for select models only) Switch cover (includes LED board and cable), Espresso Black (replaced by 571957–001 on select models)
  • Page 85 Remove the following screws: (1) Two Phillips PM2.5×6.5 screws that secure the switch cover to the computer (2) Three Phillips PM2.5×4.0 screws that secure the switch cover to the computer (these are inside the battery bay) (3) Four Phillips PM2.5×6.5 screws that secure the keyboard to the computer Turn the computer display-side up, with the front toward you.
  • Page 86 Move the switch cover back so it rests on the display. Remove the three Phillips PM2.0×3.0 screws that secure the keyboard to the computer. Lift the rear edge (1) of the keyboard . Slide the keyboard (2) back until the keyboard connector on the system board is accessible. Chapter 4 Removal and replacement procedures...
  • Page 87 Release the zero insertion force (ZIF) connector (1) to which the keyboard cable is connected and disconnect the cable (2) from the system board. Remove the keyboard. Disconnect the power button board cable (1) from the low insertion force (LIF) connector on the system board.
  • Page 88: Power Button Board

    Power button board Description Power button board for computers with discrete graphics subsystem memory (includes cable) Power button board for computers with UMA graphics subsystem memory (includes cable) Before removing the power button board, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
  • Page 89: Display Assembly

    Display assembly NOTE: The display assembly includes a webcam, 2 microphones, and 2 wireless antenna transceivers and cables. Description 15.6-inch WXGA BrightView display assembly, Onyx 15.6-inch WXGA BrightView display assembly with low light VGA webcam, Moonlight White (replaced by 571743-001) 15.6-inch WXGA BrightView display assembly with standard VGA webcam and 2 microphones, Moonlight White (replaces 517862-001) 15.6-inch WXGA BrightView display assembly with low light VGA webcam, Espresso Black...
  • Page 90 Before removing the display assembly, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
  • Page 91 Remove the display assembly (2). NOTE: Steps 5 through 22 provide display assembly internal component removal information for computer models equipped with AntiGlare display assemblies. See steps 23 through 33 for display assembly internal component removal information for computer models equipped with BrightView display assemblies.
  • Page 92 Disconnect the display logo cable (3) from the display panel cable. If it is necessary to replace the display inverter, remove the four Phillips PM2.5×5.0 screws (1) that secure the display inverter cover to the display bezel. Remove the display inverter cover (2) by lifting it straight up. NOTE: You must remove the display inverter cover to free the antenna cables.
  • Page 93 BrightView display enclosure, Espresso Black (includes wireless antenna transceivers and cables and logo LED board and cable) 16-inch AntiGlare display enclosure, Onyx (includes wireless antenna transceivers and cables) 16-inch AntiGlare display enclosure, Moonlight White (includes wireless antenna transceivers and cables) 16-inch AntiGlare display enclosure, Espreso Black (includes wireless antenna transceivers and cables) 16-inch AntiGlare display enclosure, Moonlight White (includes wireless antenna transceivers...
  • Page 94 Disconnect the backlight cables (2) and display panel cable (3) from the display bezel. Remove the display inverter. The display inverter is available using spare part number 488317-001. If it is necessary to replace the display hinges, remove the four Phillips PM2.5×5.0 screws (1) that secure the display hinge brackets to the display panel.
  • Page 95 Remove the display hinge (2). The display hinge is available in the Display Hinge Kit, spare part number 513477-001 (16-inch display) or 519209-001 (15.6-inch display). NOTE: Steps 23 through 33 provide display assembly internal component removal information for computer models equipped with BrightView display assemblies. See steps 5 through 22 for display assembly internal component removal information for computer models equipped with AntiGlare display assemblies.
  • Page 96 Remove the display bezel (4). The display bezel is available using spare part number 512359-001 (16-inch display) or 512364-001 (15.6-inch display). If it is necessary to replace the display inverter, release the display inverter (1) as far from the display enclosure as the display panel cable and backlight cable allow. Disconnect the display panel cable (2) and the backlight cable (3) from the display inverter.
  • Page 97 If it is necessary to replace the display panel, remove the two Phillips PM2.5×5.0 screws (1) from the top corners and the six Phillips PM2.5×5.0 screws (2) from the display hinges. Flex the bottom (1) of the display panel back and release the display hinges. Disconnect the display LED cable (2) from the display panel cable.
  • Page 98 Remove the display hinges (2). The display hinges are available in the Display Hinge Kit, spare part 512360-001 (16-inch display) or 512365-001 (15.6-inch display). The display hinge screws are available in the Display Screw Kit, spare part number 512362-001. If it is necessary to remove the display panel cable, remove the adhesive reinforcement strip (1) from the display panel cable, and disconnect the display panel cable from the top of the display panel (2).
  • Page 99: Top Cover

    Top cover NOTE: The top cover spare part kit includes TouchPad and TouchPad buttons, and speaker assembly. Description Top cover for use only with computer models equipped with a fingerprint reader, Onyx Top cover for use only with computer models not equipped with a fingerprint reader, Onyx Top cover for or use only with computer models equipped with a fingerprint reader, Moonlight White 518108-001 Top cover for use only with computer models not equipped with a fingerprint reader, Moonlight White 518109-001 For use only with computer models equipped with a fingerprint reader, Espresso Black...
  • Page 100 Remove one Phillips PM2.5×4.0 screw (2) that secures the top cover to the computer. This screw is in the battery bay. Turn the computer right-side up, with the front toward you. Disconnect the following cables from the system board: (1) TouchPad cable NOTE: On computer models equipped with a standard display assembly, this cable connects to a ZIF connector on the system board.
  • Page 101 Remove the five Phillips PM2.5×4.0 screws that secure the top cover to the computer. Lift the rear edge (1) of the top cover until it rests at an angle. Remove the top cover (2) by lifting it straight up. Reverse this procedure to install the top cover. Component replacement procedures...
  • Page 102: Bluetooth Module

    Bluetooth module NOTE: The Bluetooth module spare part kit does not include a Bluetooth module cable. The Bluetooth module cable is available using spare part number 489822-001. Description Bluetooth module Before removing the Bluetooth module, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
  • Page 103: Modem Module

    Modem module NOTE: The modem module spare part kit does not include a modem module cable. The modem module cable is included in the Cable Kit, spare part number 501891-001. See for more Cable Kit spare part number information. Description Modem module for use in all countries and regions except Australia and New Zealand For use only in Australia and New Zealand Before removing the modem module, follow these steps:...
  • Page 104 Lift the modem module (3) straight up to disconnect it from the system board. Reverse this procedure to install the modem module. Chapter 4 Removal and replacement procedures...
  • Page 105: Audio/Infrared Board

    Audio/infrared board Description Audio/infrared board for use with computer models equipped with discrete graphics memory (includes cable) Audio/infrared board for use with computer models equipped with UMA graphics memory (includes cable) Before removing the audio/infrared board, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
  • Page 106: Usb Board

    Lift the audio/infrared board (4) straight up to remove it from the base enclosure. Reverse this procedure to install the audio/infrared board. USB board Description USB board for use with computer models equipped with graphics subsystems with UMA graphics memory (includes cable) USB board for use with computer models equipped with graphics subsystems with discrete graphics memory (includes cable) Before removing the USB board, follow these steps:...
  • Page 107: Power Connector Cable

    Remove the USB board: Disconnect the USB board cable (1) from the LIF connector on the system board. Remove the Phillips PM2.5×6.5 screw (2) that secures the USB board to the base enclosure. Remove the USB board (3) from the base enclosure. Reverse this procedure to install the USB board.
  • Page 108 Remove the power connector cable: Remove the power connector cable (1) from the clips and routing channel built into the base enclosure. Remove the Phillips PM2.5×6.5 screw (2) that secures the power connector and bracket to the base enclosure. Remove the power connector bracket (3). Remove the power connector cable (4).
  • Page 109: System Board

    System board NOTE: The system board spare kit includes replacement thermal material. Description For use with computer models equipped with discrete graphics subsystem memory For use with computer models equipped with UMA graphics subsystem memory For use with computer models equipped with ATI Mobility Radeon HD4650 graphics with 1-GB memory For use with computer models equipped with ATI Mobility Radeon HD4530 graphics with 512-MB memory...
  • Page 110 Disconnect the modem module cable (1) from the modem module. Disconnect the following cables from the system board: (2) Audio/infrared board cable NOTE: The audio/infrared board cable connects to a LIF connector on the system board. (3) USB board cable NOTE: The USB board cable connects to a LIF connector on the system board.
  • Page 111: Tv Tuner Module Cable

    TV tuner module cable NOTE: The TV tuner module cable is available in the Cable Kit, spare part number 512832-001. Before removing the TV tuner module cable, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
  • Page 112: Modem Module Cable

    Modem module cable NOTE: The modem module cable is available in the Cable Kit, spare part number 512832-001. The modem module cable includes the RJ-11 jack. Before removing the modem module cable, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
  • Page 113: Fan/Heat Sink Assembly

    Fan/heat sink assembly NOTE: The fan/heat sink assembly spare kit includes replacement thermal material. Description For use only with computer models equipped with graphics subsystems with discrete memory For use only with computer models equipped with graphics subsystems with UMA memory For use only with computer models equipped with ATI Mobility Radeon HD4650 graphics subsystems NOTE:...
  • Page 114 CAUTION: Remove the screws in the order indicated by the callouts to ensure consistent pressure over the processor board. Loosen the three Phillips PM2.5×5.0 captive screws (5), (6), and (7) that secure the fan/heat sink assembly to the system board. CAUTION: Remove the screws in the order indicated by the callouts to ensure consistent pressure over the processor board.
  • Page 115: Processor

    Processor NOTE: The processor spare part kit includes thermal material. Description Intel Core2 Duo T9900 3.06 GHz with 6-MB L2 cache and 1066-MHz FSB Intel Core2 Duo T9800 2.93 GHz with 6-MB L2 cache and 1066-MHz FSB Intel Core2 Duo T9600 2.80 GHz with 6-MB L2 cache and 1066-MHz FSB Intel Core2 Duo T9550 2.66 GHz with 6-MB L2 cache and 1066-MHz FSB Intel Core2 Duo T9400 2.53 GHz with 6-MB L2 cache and 1066-MHz FSB Intel Core2 Duo T6600 2.20 GHz with 2-MB L2 cache and 800-MHz FSB...
  • Page 116 Switch cover and keyboard (see Display assembly (see Top cover (see USB board (see System board (see Fan/heat sink assembly (see Turn the processor locking screw (1) one-half turn counterclockwise until you hear a click. Lift the processor (2) straight up and remove it. NOTE: The gold triangle (3) on the processor must be aligned with the triangle icon (4) embossed on the processor socket when you install the processor.
  • Page 117: Setup Utility

    Setup Utility WARNING! Only authorized technicians trained by HP must repair this equipment. All troubleshooting and repair procedures are detailed to allow repair at only the subassembly or module level. Because of the complexity of the individual boards and subassemblies, do not attempt to make repairs at the component level or modify any printed wiring board.
  • Page 118: Using The Setup Utility

    Using the Setup Utility Changing the language of the Setup Utility The following procedure explains how to change the language of the Setup Utility. If the Setup Utility is not already running, begin at step 1. If the Setup Utility is already running, begin at step 2. Open the Setup Utility by turning on or restarting the computer.
  • Page 119: Displaying System Information

    Displaying system information The following procedure explains how to display system information in the Setup Utility. If the Setup Utility is not open, begin at step 1. If the Setup Utility is open, begin at step 2. Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for Startup Menu”...
  • Page 120: Setup Utility Menus

    After either choice, the computer restarts in Windows. Setup Utility menus The menu tables in this section provide an overview of Setup Utility options. NOTE: Some of the Setup Utility menu items listed in this chapter may not be supported by your computer.
  • Page 121: Diagnostics Menu

    Select Fan Always On Boot Options Diagnostics menu Select Hard Disk Self Test Secondary Hard Disk Self Test (select models only) Memory Test To do this Enable/disable Fan Always On. When enabled, the computer fan will always be on. Set the following boot options: ●...
  • Page 122: Specifications

    Specifications Computer specifications Dimensions Width Depth Height (front to back) Weight (with optical drive, hard drive, and battery) Camera adds: Input power Operating voltage Operating current Temperature Operating (not writing to optical disc) Operating (writing to optical disc) Nonoperating Relative humidity Operating Nonoperating Maximum altitude (unpressurized)
  • Page 123: 15.6-Inch, Wxga Brightview Display Specifications

    15.6-inch, WXGA BrightView display specifications Dimensions Height Width Diagonal Number of colors Contrast ratio Brightness Pixel resolution Pitch Format Configuration Backlight Character display Total power consumption Viewing angle Metric 21.0 cm 35.9 cm 39.5 cm Up to 262,000 500:1 (typical) 220 nits (typical) 0.255 ×...
  • Page 124: Inch Wxga Brightview Display Specifications

    16.0-inch WXGA BrightView display specifications Dimensions Height Width Diagonal Number of colors Contrast ratio Brightness Pitch resolution Pitch Format Configuration Backlight Character display Total power consumption Viewing angle 116 Chapter 6 Specifications Metric 21.4 cm 36.5 cm 40.6 cm Up to 262,000 600:1 (typical) 200 nits (typical) 0.259 ×...
  • Page 125: 15.6-Inch Wxga Antiglare Display Specifications

    15.6-inch WXGA AntiGlare display specifications Dimensions Height Width Diagonal Number of colors Contrast ratio Brightness Pixel resolution Pitch Format Configuration Backlight Character display Total power consumption Viewing angle Metric 21.0 cm 35.9 cm 39.5 cm Up to 262,000 500:1 (typical) 220 nits (typical) 0.255 ×...
  • Page 126: Inch Wxga Antiglare Display Specifications

    16.0-inch WXGA AntiGlare display specifications Dimensions Height Width Diagonal Number of colors Contrast ratio Brightness Pitch resolution Pitch Format Configuration Backlight Character display Total power consumption Viewing angle 118 Chapter 6 Specifications Metric 21.4 cm 36.5 cm 40.6 cm Up to 262,000 600:1 (typical) 200 nits (typical) 0.259 ×...
  • Page 127: Hard Drive Specifications

    Hard drive specifications Dimensions Height Width Weight Interface type Transfer rate Synchronous (maximum) Security Seek times (typical read, including setting) Single track Average Maximum Logical blocks Disc rotational speed Operating temperature *1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less. Actual drive specifications may differ slightly.
  • Page 128: Blu-Ray Rom Dvd±R/Rw Supermulti Double-Layer Drive Specifications

    Blu-ray ROM DVD±R/RW SuperMulti Double-Layer Drive specifications Applicable disc Access time Random Cache buffer Data transfer rate 24X CD-ROM 8X DVD 24X CD-R 16X CD-RW 8X DVD+R 4X DVD+RW 8X DVD-R 4X DVD-RW 2.4X DVD+R(9) 5X DVD-RAM 1X BD-ROM 1X BD-R read 1X BD-RE read Transfer mode 120 Chapter 6 Specifications...
  • Page 129: Dvd±Rw And Cd-Rw Supermulti Double-Layer Combo Drive Specifications

    DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive specifications Applicable disc Access time Random Cache buffer Data transfer rate 24X CD-ROM 8X DVD-ROM 24X CD-R 16X CD-RW 8X DVD+R 4X DVD+RW 8X DVD-R 4X DVD-RW 2.4X DVD+R(9) 5X DVD-RAM Transfer mode DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive specifications 121 Read: BD-ROM, BD-R, BD-RE, CD-DA, CD+(E)G, CD-...
  • Page 130: System Dma Specifications

    System DMA specifications Hardware DMA DMA0 DMA1* DMA2* DMA3 DMA4 DMA5* DMA6 DMA7 *ExpressCard controller can use DMA 1, 2, or 5. 122 Chapter 6 Specifications System function Not applicable Not applicable Not applicable Not applicable Direct memory access controller Available for ExpressCard Not assigned Not assigned...
  • Page 131: System Interrupt Specifications

    System interrupt specifications Hardware IRQ IRQ0 IRQ1 IRQ2 IRQ3 IRQ4 IRQ5* IRQ6 IRQ7* IRQ8 IRQ9* IRQ10* IRQ11 IRQ12 IRQ13 IRQ14 IRQ15 *Default configuration; audio possible configurations are IRQ5, IRQ7, IRQ9, IRQ10, or none. NOTE: ExpressCard may assert IRQ3, IRQ4, IRQ5, IRQ7, IRQ9, IRQ10, IRQ11, or IRQ15. Either the infrared or the serial port may assert IRQ3 or IRQ4.
  • Page 132: System I/O Address Specifications

    System I/O address specifications I/O address (hex) 00 - 1F 20 - 21 24 - 25 28 - 29 2C - 2D 2E - 2F 30 - 31 34 - 35 38 - 39 3C - 3D 40 - 43 4E - 4F 50 - 53 70 - 77...
  • Page 133 I/O address (hex) BC - BD C0 - DF 380 - 383 384 - 38E 3B0 - 3BB 3C0 - 3DF 400 - 47F 4D0 - 4D1 500 - 53F 600 - 60F 800 - 80F 810 - 817 820 - 823 D00 - FFFF 164E - 164F 2000 - 2FFF...
  • Page 134 I/O address (hex) 8080 - 809F 80A0 - 80BF 80C0 - 80DF 80E0 - 80FF 8100 - 8117 126 Chapter 6 Specifications System function (shipping configuration) USB UHCI Controller - 2935 USB UHCI Controller - 2934 USB UHCI Controller - 3938 USB UHCI Controller - 2937 USB UHCI Controller - 2929...
  • Page 135: System Memory Map Specifications

    System memory map specifications Size 640 KB 128 KB 48 KB 160 KB 64 KB 15 MB 58 MB 58 MB 2 MB 4 GB 64 KB Memory address 00000000-0009FFFF 000A0000-000BFFFF 000C0000-000CBFFF 000C8000-000E7FFF 000E8000-000FFFFF 00100000-00FFFFFF 04800000-07FFFFFF 04800000-07FFFFFF 08000000-080FFFFF 08200000-FFFEFFFF FFFF0000-FFFFFFFF System memory map specifications 127 System function Base memory...
  • Page 136: Screw Listing

    Screw listing This section provides specification and reference information for the screws used in the computer. All screws listed in this section are available in the Screw Kit, spare part number 516498-001, or the Display Screw Kit, spare part number 512362-001. 128 Chapter 7 Screw listing...
  • Page 137: Phillips Pm2.0×3.0 Screw

    Phillips PM2.0×3.0 screw Color Black Where used: One screw that secures the Bluetooth module to the top cover. Where used: Two screws that secure the optical drive bracket to the computer. Quantity Length 3.0 mm Thread Head diameter 2.0 mm 4.5 mm Phillips PM2.0×3.0 screw 129...
  • Page 138 Where used: Three screws that secure the keyboard to the computer 130 Chapter 7 Screw listing...
  • Page 139: Phillips Pm2.0×3.0 Screw

    Phillips PM2.0×3.0 screw Color Silver Where used: (1) One screw that secures the WLAN module to the system board (2) One screw that secures the TV tuner module to the system board Quantity Length 3.0 mm Thread Head diameter 2.0 mm 4.5 mm Phillips PM2.0×3.0 screw 131...
  • Page 140 Where used: Four screws that secure the display hinge brackets to the display panel. Where used: Two screws that secure the wireless antennas to the display cover 132 Chapter 7 Screw listing...
  • Page 141: Phillips Pm2.0×14.0 Captive Screw

    Phillips PM2.0×14.0 captive screw Color Silver Where used: Three screws that secure the fan and heat sink to the system board Quantity Length 14.0 mm Thread Head diameter 2.0 mm 4.5 mm Phillips PM2.0×14.0 captive screw 133...
  • Page 142: Phillips Pm2.5×3.0 Screw

    Phillips PM2.5×3.0 screw Color Black Where used: Two screws that secure the modem module to the system board Where used: One screw that secures the audio/infrared board to the system board 134 Chapter 7 Screw listing Quantity Length 3.0 mm Thread Head diameter 2.5 mm...
  • Page 143: Phillips Pm2.5×4.0 Screw

    Phillips PM2.5×4.0 screw Color Black Where used: One screw that secures the power button board to the switch cover Where used: Three screws that secure the switch cover to the keyboard Quantity Length 4.0 mm Thread Head diameter 2.5 mm 4.5 mm Phillips PM2.5×4.0 screw 135...
  • Page 144 Where used: Five screws that secure the top cover to the computer Where used: One screw that secures the top cover to the computer 136 Chapter 7 Screw listing...
  • Page 145: Phillips Pm2.5×5.0 Screw

    Phillips PM2.5×5.0 screw Color Black Where used: Four screws that secure the display inverter cover to the display bezel on computer models equipped with AntiGlare display assemblies Where used: Two screws that secure the display hinge bracket to the display bezel on computer models equipped with AntiGlare display assemblies Quantity Length...
  • Page 146 Where used: Four screws that secure the display hinges to the display bezel on computer models equipped with AntiGlare display assemblies Where used: Four screws that secure the display enclosure to the display bezel on computer models equipped with AntiGlare display assemblies Where used: Eight screws that secure the display panel to the display on computer models equipped with BrightView display assemblies 138 Chapter 7 Screw listing...
  • Page 147: Phillips Pm2.5×5.0 Captive Screw

    Phillips PM2.5×5.0 captive screw Color Black Where used: Three screws that secure the fan and heat sink to the system board Quantity Length 5.0 mm Thread Head diameter 2.5 mm 4.5 mm Phillips PM2.5×5.0 captive screw 139...
  • Page 148: Phillips Pm2.5×5.5 Captive Screw

    Phillips PM2.5×5.5 captive screw Color Black Where used: (1) Three captive screws that secure the memory module compartment cover to the computer (screws are secured by C-clips) (2) Two captive screws that secure the hard drive bay cover to the computer (screws are secured by C- clips) 140 Chapter 7 Screw listing Quantity...
  • Page 149: Phillips Pm2.5×6.5 Screw

    Phillips PM2.5×6.5 screw Color Black Where used: (1) One screw that secures the USB board to the system board (2) One screw that secures the system board to the computer Where used: Four screws that secure the keyboard to the computer Quantity Length 6.5 mm...
  • Page 150 Where used: Two screws that secure the switch cover to the keyboard Where used: Four screws that secure the display assembly to the computer Where used: One screw that secures the power connector bracket to the base enclosure 142 Chapter 7 Screw listing...
  • Page 151 Where used: One screw that secures the optical drive to the computer Where used: Nine screws that secure the top cover to the base enclosure Where used: Two screws that secure the display bezel to the display on computer models equipped with BrightView display assemblies Phillips PM2.5×6.5 screw 143...
  • Page 152: Phillips Pm3.0×3.5 Screw

    Phillips PM3.0×3.5 screw Color Silver Where used: Four screws that secure the hard drive bracket to the hard drive 144 Chapter 7 Screw listing Quantity Length 3.5 mm Thread Head diameter 3.0 mm 4.8 mm...
  • Page 153: Backup And Recovery

    Recovery discs have been included for computers that do not have a partition. Use these discs to recover your operating system and software. To check for the presence of a recovery partition, select Start > Computer. If the partition is present, an HP Recovery drive is listed in the Hard Disk Drives section of the window.
  • Page 154: Creating Recovery Discs

    Creating recovery discs NOTE: HP recommends that you create recovery discs to be sure that you can restore your system to its original factory state if you experience serious system failure or instability. Create these discs after setting up the computer for the first time.
  • Page 155: Backing Up Your Information

    Backing up your information When to back up ● On a regularly scheduled basis NOTE: Set reminders to back up your information periodically. ● Before the computer is repaired or restored ● Before you add or modify hardware or software Backup suggestions ●...
  • Page 156: When To Create Restore Points

    When to create restore points ● Before you add or extensively modify software or hardware ● Periodically, whenever the system is performing optimally NOTE: If you revert to a restore point and then change your mind, you can reverse the restoration. Create a system restore point Select Start >...
  • Page 157: Performing A Recovery

    Performing a recovery NOTE: You can recover only files that you have previously backed up. HP recommends that you use Recovery Manager to create an entire drive backup as soon as you set up your computer. Recovery Manager software allows you to repair or restore the system if you experience system failure or instability.
  • Page 158: Connector Pin Assignments

    Connector pin assignments 1394 Audio-in (microphone) 150 Chapter 9 Connector pin assignments Signal Power Ground TPB- TPB+ TPA- TPA+ Signal Audio signal in Audio signal in Ground...
  • Page 159: Audio-Out (Headphone)

    Audio-out (headphone) External monitor Signal Audio out, left channel Audio out, right channel Ground Signal Red analog Green analog Blue analog Not connected Ground Ground analog Ground analog Ground analog +5 VDC Ground Monitor detect DDC 2B data Horizontal sync Vertical sync DDC 2B clock Audio-out (headphone) 151...
  • Page 160: Hdmi

    HDMI 152 Chapter 9 Connector pin assignments Signal Transition minimized differential signal (TMDS) data 2+ TMDS data 2 shield TMDS data 2– TMDS data 1+ TMDS data 1 shield TMDS data 1– TMDS data 0+ TMDS data 0 shield TMDS data 0– TMDS clock+ TMDS clock shield TMDS clock-...
  • Page 161: Modem)

    RJ-11 (modem) RJ-45 (network) Signal Unused Ring Unused Unused Unused Signal Transmit + Transmit - Receive + Unused Unused Receive - Unused Unused RJ-11 (modem) 153...
  • Page 162: Universal Serial Bus

    Universal Serial Bus 154 Chapter 9 Connector pin assignments Signal +5 VDC Data - Data + Ground...
  • Page 163: 10 Power Cord Set Requirements

    10 Power cord set requirements The wide range input feature of the computer permits it to operate from any line voltage from 100 to 120 volts AC or from 220 to 240 volts AC. The 3-conductor power cord set included with the computer meets the requirements for use in the country or region where the equipment is purchased.
  • Page 164: Requirements For Specific Countries Or Regions

    Requirements for specific countries or regions Country or region Australia Austria Belgium Canada Denmark Finland France Germany Italy Japan The Netherlands Norway The People's Republic of China South Korea Sweden Switzerland Taiwan The United Kingdom The United States The flexible cord must be Type HO5VV-F, 3-conductor, 1.0-mm² conductor size. Power cord set fittings (appliance coupler and wall plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it will be used.
  • Page 165: 11 Recycling

    When you remove these components, handle them carefully. NOTE: Materials Disposal. This HP product contains mercury in the backlight in the display assembly that might require special handling at end-of-life. Disposal of mercury may be regulated because of environmental considerations. For disposal or recycling information, contact your local authorities, or see the Electronic Industries Alliance (EIA) Web site at http://www.eiae.org.
  • Page 166 Perform the following steps to disassemble the display assembly: Remove all screw covers (1) and screws (2) that secure the display bezel to the display assembly. Lift up and out on the left and right inside edges (1) and the top and bottom inside edges (2) of the display bezel until the bezel disengages from the display assembly.
  • Page 167 Disconnect all display panel cables (1) from the display inverter and remove the inverter (2). Remove all screws (1) that secure the display panel assembly to the display enclosure. Remove the display panel assembly (2) from the display enclosure. Turn the display panel assembly upside down. Remove all screws that secure the display panel frame to the display panel.
  • Page 168 Remove the display panel frame (2) from the display panel. Remove the screws (1) that secure the backlight cover to the display panel. Lift the top edge of the backlight cover (2) and swing it outward. Remove the backlight cover. Turn the display panel right-side up.
  • Page 169 Remove the backlight cables (1) from the clip (2) in the display panel. Turn the display panel upside down. Remove the backlight frame from the display panel. WARNING! The backlight contains mercury. Exercise caution when removing and handling the backlight to avoid damaging this component and causing exposure to the mercury. Display 161...
  • Page 170 Remove the backlight from the backlight frame. Disconnect the display cable (1) from the LCD panel. Remove the screws (2) that secure the LCD panel to the display rear panel. Release the LCD panel (3) from the display rear panel. Release the tape (4) that secures the LCD panel to the display rear panel.
  • Page 171: Index

    Index Symbols/Numerics 1394 port pin assignments 150 1394 port, identifying 16 1394 Power Saving 112 AC adapter, spare part numbers 39, 41, 43 administrator password 112 antennas 19 applications key, Windows 13 audio board, spare part numbers 45 audio cable, illustrated 38 audio, product description 5 audio-in (microphone) jack identifying 14...
  • Page 172 Onyx spare part numbers 43, removal 60 spare part numbers 21, 60 display assembly, Onyx spare part numbers 43 display bezel illustrated 35 release 60 spare part number 35, 45, display cable, spare part numbers 35, 45 display components illustrated 22, 35 recycling 157 display enclosure Espresso Black spare part...
  • Page 173 I/O address specifications 124 IEEE 1394 port, identifying 16 infrared lens, identifying 14 integrated webcam, identifying 18 internal microphone, identifying 18 interrupt specifications 123 jacks audio-in (microphone) 14 audio-out (headphone) 14 RJ-11 (modem) 15 RJ-45 (network) 16 TV antenna/cable 15 keyboard Espresso Black spare part numbers 48, 49...
  • Page 174 Plastics Kit contents 37 spare part number 27, 37, play/pause button, identifying 11 play/pause light, identifying 9 pointing device product description 6 ports 1394 16 eSATA/USB 16 expansion 16 external monitor 16 HDMI 16 product description 6 USB 15, 16 power button board removal 80 spare part number 23, 45,...
  • Page 175 interrupts 123 memory map 127 optical drive 120, 121 system DMA 122 static-shielding materials 56 stop button, identifying 12 stop light, identifying 10 supported discs 146 switch cover Espresso Black spare part number 22 Espresso Black spare part numbers 48 Moonlight White spare part number 22 Moonlight White spare part...

This manual is also suitable for:

Pavilion dv6-1050Pavilion dv6-1238Pavilion dv6-1053Pavilion dv6-1054Pavilion dv6-1243Pavilion dv6-1244 ... Show all

Table of Contents